25,000 hours.
LED Strip has been engineered that it can emit the perfect shade of light for over 25,000 hours of use.
250 watts.
If it were an incandescent bulb, LED Strip would fill your room with 250 watts of brightness when emitting white light.
Lumens.
5,000 lumens at 3000 to 6500 Kelvin in each strip, and 1100 lumens per metre.
80 CRI.
Colour accuracy is everything; LED Strip is able to produce colours at a colour rendering index level of of 80.
Kelvin.
LED Strip is capable of producing colours and whites between 3000 and 6500 Kelvin.
5 metre length.
Fill a full room with perfect light; LED Strip measures 5 metres / 197 inches. It can also be cut to size at 8 inch intervals.
Low power.
Using 1.2 watts of power when turned off, LED Strip uses as little as only 14 watts per metre when fully illuminated.
Dim as you desire.
A powerful 5,000 lumens at max brightness, LED Strip can be dimmed anywhere from 100% to just 1%.
Waterproof to IP65.
So that it’s not impacted when you clean or mop, each strip is waterproofed to an IP65 level.
Outdoor lighting.
Provided the strip isn’t exposed to direct sun and its hub is indoors or sealed and, LED Strip can be used outdoors in ranges between -20ºC and 40ºC.
Wireless range.
Control LED Strip across your home; LED Strip can be up to 150 metres from other Z-Wave devices.
Repeater inside.
It doesn’t just benefit your home, but your home control system too; LED Strip acts as a Z-Wave Plus repeater.
Bright light, low power.
It’s equivalent to a 250 watt incandescent bulb, but it’s also lower power. LED Strip consumes only 72 watts at maximum brightness.
Gen5.
LED Strip utilises Aeotec’s leading Gen5 technology for perfect fastest response times and functionality.
Z-Wave Plus.
Because it’s powered by Aeotec’s Gen5, LED Strip is also built upon the latest Z-Wave: Z-Wave Plus.