Installing LED Flex Strips: Mounting Techniques

LED flex strips are extremely popular in home lighting applications. LED strip light applications continue to grow because of their ease of use. The low-profile design, flexibility, efficiency and adhesive backing make them a no-brainer for many DIYers looking to put LEDs in their home. Like any other product, the whole is only as good as…

Installing LED Flex Strips: Mounting Techniques 1

LED Strip Adhesive (peel off) BackingLED flex strips are extraordinarily common in house lighting purposes. LED strip mild purposes proceed to develop due to their ease of use. The low-profile design, flexibility, effectivity and adhesive backing make them a no brainer for a lot of DIYers seeking to put LEDs of their house. Like every other product, the entire is barely pretty much as good because the elements. A typical failure for these strips is that their adhesive backing fails on some surfaces or tends to present manner over time. Fortunately, right here at LEDSupply now we have taken suggestions and located further methods to mount these LED strips. Use a few of these strategies in putting in LED strips to take pleasure in for years to return!

LED Strips that merely is not going to stick!

The self-adhesive on the again of the led strip lights usually wants a clean floor with a purpose to stick securely. Tough surfaces or too many grooves will restrict the contact between the floor and the 3M tape backing. Much less contact means much less of a bond, resulting in the flex strips falling or drooping in locations.mounting LED strip on rough surface

The LED tape backing additionally doesn’t bond properly with sure finishes. If the floor has a shiny or oily floor, the strip seemingly will slide round an excessive amount of or not stick in any respect. In these kind of conditions, will probably be crucial to search out different mounting choices for the strip lights.

The surroundings across the strip additionally impacts the peel-and-stick backing. Highly regarded climates will result in failure within the adhesive materials. It could be working at first, however after one extraordinarily scorching day, the tape will fail because the floor temperature rises. Humidity and moisture within the air even have a detrimental impact on the strips inflicting them to lose their bonding potential.

Mounting Strategies for LED Flex Strips

LED strips falling down and dropping their adhesive backing is usually a actual ache to cope with. Fortunately there are a couple of different strategies that may save a variety of time and complications.

LED Strip Mounting Clips

LED flex strip mounting bracketsIt is a easy, low-cost answer for putting in LED strips that doesn’t depend on double sided tape. These small clips use a one screw design to screw into surfaces and clip over the LED strip, holding it in place. These clips are simply $1.99 for a pack of 15 which must be loads of clips for a reel of flex strips (roughly 1 clip per foot).

The brackets work nice in purposes the place the lights are going through downward as in below cupboard lighting. This straightforward step of putting in LED strip mild fasteners will save from worrying about falling strips sooner or later.mounting under cabinet LED strip lights

LED Strip Mounting Channel

This aluminum channel is an inexpensive method to mount LED strip lights whereas giving them the very best skilled look. This observe is available in .5 and full meter lengths that may home LED strips as much as 10mm in Aluminum channel for LED flex stripsdiameter, just like the Normal and Excessive Density Flex Strips. The observe comes with an elective UV protected cowl that diffuses the sunshine barely and appears improbable.

This technique nonetheless depends on the adhesive backing because the strips adhere to the aluminum observe. The aluminum and adhesive work very properly collectively and kind an important bond. There are then clips that maintain the observe in place that may mount to the specified floor.

That is extremely really useful if the sunshine goes to be seen immediately by individuals. The observe and UV protected display cowl make the lights appear like knowledgeable fixture, nobody would guess it’s flex strips inside.

Further Sturdy Double Sided Tape

This final technique is for when mounting choices are restricted within the house or there is no such thing as a method to screw into the floor the place the LED strips must go. LEDSupply carries a robust double sided tape that’s bought by the foot. This tape is rated for top temperatures and is significantly better than the adhesive used on the flex strips themselves. Use this tape to double the bond and make sure the LED strips keep the place they’re put.

Source

Subscribe our newsletter

Subscribe now and get 25% OFF of all our storewide products

Lorem ipsum dolor sit amet, consectetur adipiscing elit purus luctuc eget
Powertrical new logo

Best guides to perfect electrical accessories and supplies for authentic suppliers